background image

20

21

PARTS LIST

WARRANTY

PARTS LIST

 

3-Year Limited Warranty 

This Mastercraft product is guaranteed for a period of 

three (3) years

 from the date of original retail 

purchase, against defects in materials and workmanship.
Subject to the conditions and limitations described below, this product, if returned to us with proof of 
purchase within the stated warranty period and if covered under this warranty, will be repaired or replaced 
(with the same model, or one of equal value or specification), at our option. We will bear the cost of any 
repair or replacement and any costs of labour relating thereto.

These warranties are subject to the following conditions and limitations :

a)  a bill of sale verifying the purchase and purchase date must be provided;

b)  this warranty will not apply to any product or part thereof which is worn or broken or which has become inoperative 

due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation or maintenance 
(as outlined in the applicable owner’s manual or operating instructions) or which is being used for industrial, 
professional, commercial or rental purposes;

c)  this warranty will not apply to normal wear and tear or to expendable parts or accessories that may be supplied with 

the product which are expected to become inoperative or unusable after a reasonable period of use;

d)  this warranty will not apply to routine maintenance and consumable items such as, but not limited to, fuel, lubricants, 

vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or adjustments;

e)  this warranty will not apply where damage is caused by repairs made or attempted by others (i.e. persons not 

authorized by the manufacturer);

f)   this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or refurbished 

product (unless otherwise specified in writing);

g)  this warranty will not apply to any product or part thereof if any part from another manufacturer is installed therein or 

any repairs or alterations have been made or attempted by unauthorized persons;

h)  this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to, scratches, dents, 

paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners; 

i)   this warranty will not apply to component parts sold by and identified as the product of another company, which shall 

be covered under the product manufacturer’s warranty, if any.

If any part is missing or damaged, do not use the product until the missing or damaged part has been replaced.

WARNING!

NOTE:

The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the 
manufacturer nor distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the 
product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs  
and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability 
arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts 
thereto.

model no. 058-1294-8  |  contact us 1-800-689-9928

model no. 058-1294-8  |  contact us 1-800-689-9928

model no. 058-1294-8  |  contact us 1-800-689-9928

model no. 058-1294-8  |  contact us 1-800-689-9928

No.

Description

No.

Description

Clamp

11

Handle

1

Index panel

2

Panel

3

 Iron core 1

4

Clip clutch

4.1

Thermal relay

4.2

 Iron core 2

4.3

Bracket

4.4

Screw plug spring

5

Pointer

6

Wheel

8

Indictor light

9

Switch

10

Rubber circle

7

1

1

1
1

2

1

2
1

1

1
1

1

1

1

2

1
1

1
1

1

2
2

2

1

1

1

1

1

1

Grounding cable

12

Welding cable

13

Fixed bracket

14

Frame

15

Fan

16

Cotter

17

Washer

18

Wheel      

19

Axle bracket

20

Axle

21

Cable clamp

23

Power cable

24

Coil

25

22

Axle bracket

Qty

Qty

Summary of Contents for 058-1294-8













Reviews: