MasterCraft 054-8258-2, Instruction Manual

Page: 5 / 13

headline bars
continuation tabs
notes
warnings
9
headline bars
continuation tabs
notes
warnings
model no. 054-8258-2 | contact us 1.800.689.9928
8
PACKAge CONTeNTS:
Jigsaw, edge guide, hex key (installed on the tool), wood cutting blade and instruction manual.
7
6
5
3
4
8
1 2
No. Part No. Part
1 On/off trigger switch 5 Blade-guide roller
2 Lock-on button 6 Tool-less blade clamp
3 Variable-speed dial 7 Blade
4 Shoe plate 8 Hex key storage
SAfeTy gUIdeLINeS fOR jIgSAw
• Hold the power tool by the insulated gripping surfaces when performing an operation where the
cutting accessory may contact hidden wiring or its own cord. If a cutting accessory contacts a “live”
wire, it may make the exposed metal parts of the power tool “live” and could give the operator an electric
shock.
• Use clamps or another practical way to support the workpiece and secure it to a stable
platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• The label on your tool may include the following symbols. The symbols and their definitions are
as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No-load speed
............... Class II Construction
…/min ........... Revolutions or reciprocation per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual .
• The saw blade must be locked in its holder securely. Check that it had been securely seated before
use.
• Secure material before cutting. Never hold it in your hand or across legs.
• Never touch the saw blade immediately after use.
It may be hot after prolonged use.
• Always wear safety goggles or eye protection when using this tool.
Use a dust mask or respirator or
connect the tool to an external dust vacuum if the cutting generates a great amount of dust.
• Keep hands away from the cutting area. Do not reach under the material being cut. The proximity
of the blade to your hand is hidden from your sight.
• Do not use dull or damaged saw blades and accessories.
• Protect your hearing.
Wear appropriate personal hearing protection during use. Under some conditions
noise from this product may contribute to hearing loss.
• Inspect the tool cords periodically and, if damaged, have them repaired by a qualified service
technician. BE AWARE of the cord location.
wARNINg!
• Remove the jigsaw from the package and examine it carefully. Do not discard the carton or
any packaging material until all parts have been examined.
FPO
KEY P
AR
TS DIAGRAM
SAFETY GUIDELINES