headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
12
model no. 054-0370-0 | contact us 1-800-689-9928
5. Replace the side cover onto the saw head. Rotate
the side-cover knob clockwise to slightly tighten the
side cover, but leave the bar free to move for tension
adjustment
(fig. 1e)
.
6. Rotate the side-cover knob clockwise to completely
tighten the side cover.
fig. 1e
Side-cover knob
Side cover
OPERA
TING INSTRUCTIONS
WARNING!
• Always wear protective gloves when handling the bar and chain; these components are sharp and may
contain burrs.
FPO
NOTICE:
• When you first purchase your pole saw, the chain and bar will not be attached to the saw.
• The chain is correctly tensioned when there is no sag on the underside of the guide bar; the chain is snug, but can be
rotated by hand without binding. For more information on chain tensioning, see the maintenance section.
• If the chain is too tight, it will not rotate. Loosen the side cover slightly and turn the chain tensioner 1/4 turn counter-
clockwise
(fig. 1f)
.
Lift the tip of the guide bar up and retighten the side cover. Ensure that the chain can be rotated by
hand without binding.
fig. 1f
Chain tensioner
Loosen the chain tension
Wrench
Summary of Contents for 054-0370-0
Page 23: ...23 EXPLODED VIEW PARTS LIST...
Page 28: ......
