Masterclock NTD200 Series User Manual – v1 – January 2014
31
Health and Safety
These devices generate, use and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will
not occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can
be determined by removing power from the device, the user is
encouraged to try to correct the interference by one or more of
the following measures:
1.
Connect the devices AC power cord into an outlet on a
different circuit than other devices.
2.
Increase the physical distance between the NTD200 digital
time display and other devices.
3.
Contact technical support.
This NTD200 series has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules, along with the CE test. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation.
Only qualified persons are authorized to carry out maintenance
on this device. Read this User’s Manual carefully, and follow the
correct procedure when setting up the device. Do not open your
Masterclock product or attempt to disassemble or modify it.
COPYRIGHT
© 2014 Masterclock, Inc. All rights reserved. No part of this
publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the
prior written consent of Masterclock, Inc.
TRADEMARKS
Microsoft is a registered trademark of Microsoft Corporation.
Other trademarks mentioned in this manual are the property of
their respective owners.
PRINTING
While optimized for onscreen viewing, the pages of this manual
are formatted for printing on 8.5” x 11” and A4 sized paper,
giving you the option to print the entire manual or just a specific
page or section.
Never
insert any metallic object into
the devices case. Doing so increases
the risk of electrical shock, short
circuiting, fire or personal injury.
Never
expose this device to rain, or use
it near water or in damp or wet
conditions.
Never
place objects containing liquids
on or near this device, as they may spill
into its openings increasing the risk of
electrical shock, short circuiting, fire or
personal injury
