Master R11 MAS4A180, User Manual

Page: 49 / 56

5
EN
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers, Foot Pedals Installation
Remove four M8x20Bolts (57), four Ø8xØ20 Big Flat Washers (45) from the Front Stabilizer
(6).Position the Front Stabilizer (6) in front of the Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (6) onto the front curve of the Main Frame (1) with four M8x20
Bolts (57), four Ø8xØ20 Big Washers (45) that were removed.
Position the Rear Stabilizer (7) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (7) onto the rear curve of the Main Frame (1) with four M8x15
Bolts (73), four Ø8xØ20 Big Curve Washers (45).
Foot Pedals Installation
Insert the pedal shaft of Left Foot Pedal (28) into threaded hole in the left Crank (26). Turn
the pedal shaft by hand in the counter-clockwise direction until snug.
Insert the pedal shaft of Right Foot Pedal (42) into threaded hole in right Crank (41). Turn
the pedal shaft by hand in the clockwise direction until snug.
NOTE: The Cranks, Pedal Shafts and Pedal Straps are marked “R” for Right and“L” for
Left.