www.masterproducts.es
23
¡IMPORTANT!
Apply the brakes on the four wheels of the support to prevent unintentional movement of the
equipment during assembly.
Due to transport and in order to avoid damage to the components, the conveyor belt
A
and support
B
are deli-
vered pre-assembled, as shown in the following image.
1.
First of all, unscrew and remove the two DIN 7380 M8 screws and the two stop washers, shown in red in the
following image, using an Allen key no. 5. Store these components in a safe and known place for later use.