www.masterproducts.es
32
8.
Finally, connect one end of the supplied power cable to the connector on the electrical box and the other end to
the power supply.
¡IMPORTANT!
Make sure that the electrical wiring is perfectly positioned, without forming loops that could cause
users to trip over.
12. Disassembly and dismantling
- Before dismantling, all possible sources of energy and/or power supply must be disconnected.
- For disassembly and dismantling operations, wear protective gloves and goggles.
- Covers, hoses and components made of plastic or any other non-metallic material must be dismantled and disposed
of separately.
- Hydraulic and electrical components such as valves, solenoid valves, etc. should be disassembled for reuse if they are
in good condition or, if possible, overhauled and recycled.
- Take the components to an authorized recycling centre for recycling and/or environmentally safe disposal. Recycle
unwanted materials instead of disposing of them as waste.
13. Waste disposal
Waste must be disposed of according to the corresponding national regulations.
14. Residuals risks
The improper use of the machine can lead to:
REASON
DANGER
REMAINING RISKS
PRECAUTION
Not tightening screws
correctly
The lift conveyor can be
disassembled
Crushing and entrapment
of the operator
Secure and tighten screws
firmly
Not placing correctly,
the lift conveyor
Drop of the product to the
ground
Contamination and
product damage
Place correctly the
equipment
