Page 4
1. SAFETY INDICATIONS
1.1.
General notes
ATTENTION: Before installing this appliance, ensure all safety
indications have been read carefully and understood in order to prevent
contact with electricity, injury or any other incident. The manual should
be conserved for further consultation at a later date.
The manufacturer accepts no responsibility for damage to people,
animals or things incurred by improper use.
Use for any applications other than those indicated must be authorised
by the manufacturer after technical review of the assembly.
Plastic bags, polystyrene, small metal parts such as nails, staples etc. should
be placed out of the reach of children as they constitute a potential source of
risk.
Do not use solvents or jets of water to wash the appliance. The appliance
should not be submerged in water.
1.2.
Notes for functioning and use
This device is intended only and exclusively for the use for which it was
designed, and the manufacturer cannot be held liable for damage due to
improper use.
Central control have been designed and constructed exclusively to execute maneuvers for
closing and/or opening windows, roll-up blinds, curtains and sunshades, assisted by the aid
of sensors for rain, wind, brightness and temperature.
Specific use is reserved for automatic ventilation and air-conditioning of rooms, which is
carried out through the connected motors;
any use for applications other than those
specified must be authorized by the manufacturer, upon technical verification.
The appliance must be installed by competent and qualified technical
personnel. Improper installation and use make the unit dangerous for people
and things.
To ensure efficient separation from the grid, an approved type of bipolar pulse
switch should be used. An omnipolar general power switch with minimum
distance of 3 mm between contacts should be installed upstream of the control
line.
Before carrying out any cleaning or maintenance, make sure the equipment
has been disconnected from the electricity supply. To guarantee safe working
conditions, we recommend all cables are disconnected.
Attention:
in the event of breakage or malfunction, switch the appliance off at
the general switch and call for the services of a qualified technician.
