Electrical
Requirements
:
Always follow all local electrical codes when installing our
water
treatment equipment.
1. Provide an 115v/60Hz properly grounded dedicated electrical
outlet. (It’s very important that the polarity be correct)
Avoid using outlets that are switch controlled.
2. Maximum amperage required is 5 amps.
3. Make sure the electrical service provides power 24 hours per day.
We recommend installing a
surge protector
to protect unit from
power surges, which are not covered by warranty.
!!! DO NOT UNDER ANY CIRCUMSTANCE WIRE THE UV UNIT TO THE
WELL PUMP SWITCH OR WELL PUMP ELECTRICAL SUPPLY!!!
Meter & Power Supply Installation:
1. Choose
a wall placement that is dry and clear of all piping and
metal objects, and within 4 feet of the UV vessel and the
electrical outlet.
2. Remove cover from power supply for mounting.
3.
Secure power supply to wall with screws (not provided).
SEE PROPER GROUNDING INSTRUCTIONS ON NEXT PAGE
