Master Therm AirMaster aku, Installation And Operating Manual

Page: 31 / 64

AM, EM, AQ, BA, ASW - IOM
page: 31/64 Ing.Ji ř í Jiránek
Drill holes - Clay, Slate 13m/kW
No of Drills
Loop type
HP Type
H.Cap.
B0W35
[kW]
Total
Depth
[m]
Pipe
Dimension
4x 4x
Depth
1 Drill
[m]
Pipe
Length
[m]
Circuit
Volume
[l]
AQ17 6,6 86 PE32 1 - 86 344 183
AQ22(AQ22I) 7,8 102 PE25 2 - 51 408 128
AQ26 10,1 132 PE32 2 - 66 528 280
AQ30(AQ30I) 11,4 150 PE32 2 - 75 600 318
AQ37 14,1 184 PE32 3 - 61 736 391
AQ45 17,2 224 PE32 3 - 75 896 475
AQ50 18,5 242 PE32 3 - 81 968 514
AQ60(AQ45I) 22,8 298 PE40 - 4 75 596 479
AQ75 27,8 362 PE40 - 5 72 724 582
AQ90(AQ60I) 33,2 432 PE40 - 6 72 864 695
Drill holes - rocky ground 10m/kW
No of Drills
Loop type HP Type
H.Cap.
B0W35
[kW]
Total
Depth
[m]
Pipe
Dimension
4x 4x
Depth
1 Drill
[m]
Pipe
Length
[m]
Circuit
Volume
[l]
AQ17 6,6 66 PE32 1 - 66 264 140
AQ22(AQ22I) 7,8 78 PE32 1 - 78 312 166
AQ26 10,1 102 PE32 2 - 51 408 217
AQ30(AQ30I) 11,4 114 PE32 2 - 57 456 242
AQ37 14,1 142 PE32 2 - 71 568 301
AQ45 17,2 172 PE32 3 - 57 688 365
AQ50 18,5 186 PE32 3 - 62 744 395
AQ60(AQ45I) 22,8 228 PE40 3 - 76 912 484
AQ75 27,8 278 PE40 - 4 70 556 447
AQ90(AQ60I) 33,2 332 PE40 - 4 83 664 534
4.3 Caution
This dimensioning of heat exchangers assumes standard heating season for a family house in
CR of average length 230 days and a year-round preparation of domestic hot water (DHW) for 4
persons. For the following cases the collector must be designed by a specialist and for example
the drill holes are regenerated by solar collectors:
• Heating season exceeding 250 days, typical for mountain and submountain areas
• Pool heating, especially indoor
• High demands on DHW preparation
4.4 Piping
For the exchanger is used thin-wall PE piping of outer diameter 32 or 40mm. We recommend
piping from the PE100 material, pressure line PN16. This piping can be connected only using
electrofusion welding or compression fittings. For the armature of drill holes we recommend
using only prefabricated and certified probes.