![background image](http://html.mh-extra.com/html/master-mechanic/134454/134454_owners-manual_1737545019.webp)
19
REMOVING BITS
1. To open the keyless drill chuck, grasp
and hold the chuck collar with one
hand. Rotate the chuck body with the
other hand in a counter clockwise
direction until the chuck jaws open
and release the bit.
2. Remove the drill bit.
ASSEMBLY AND OPERATING
For safety reasons, the operator must
read the sections of this Owner’s
Manual entitled "GENERAL SAFETY
WARNINGS", "POWER TOOL
SAFETY", "SPECIFIC SAFETY RULES",
"BATTERY & CHARGER SAFETY" and
"SYMBOLS" before using this cordless
drill.
Verify the following every time the
cordless drill is used:
1. Safety glasses, safety goggles, or
face shield is being worn.
2. Hearing protection is being worn.
3. The chuck has not worked loose
on the spindle.
4. The bit is in good condition and is
properly tightened onto the chuck.
Failure to observe these safety rules
will significantly increase the risk of
injury.
WARNING
!
Summary of Contents for 134454
Page 25: ...25 EXPLODED VIEW ...