master mechanic 134454, Owner'S Manual

Page: 15 / 27

15
INSTALLING A BATTERY IN THE DRILL
1. Remove the discharged battery (1)
from the drill by pressing on the
battery release button (2) and sliding
the battery backward until it is
removed from the drill handle (3)
(Fig. 3).
2. Slide the fully charged battery into the
drill handle where the discharged
battery has been removed.
NOTE: Make sure the mounting keys (4) in
the battery are fully engaged with the
matching slots in the drill handle. The
battery release button will “click” into place
when the battery is fully installed.
WARNING:
Do not immerse the
battery pack in water. Sudden cooling
could cause a hot battery to explode or
leak.
ADJUSTING THE TORQUE
Your drill is equipped with an adjustable
torque clutch for driving different types of
screws into different types of materials. It
also has a setting for “drilling”. The proper
setting depends upon the type of material
and size of screw being used and the
function required.
ASSEMBLY AND OPERATING
Fig. 3
!