background image

Warranty   

 

his 

MASTERFORCE™

 brand power tool carries our 3-Month Money Back Guarantee.

   

If you are not 

TERFORCE™

 brand power tool for any reason within three (3) 

MASTERFORCE™ SCROLL SAW WARRANTY 

 

 
3-MONTH MONEY BACK GUARANTEE:

 

T
completely satisfied with your 

MAS

months from the date of purchase, return the tool with your original receipt to any 

 retail 

store, and we will provide you a refund – no questions asked. 
 

3-YEAR

 

LIMITED WARRANTY:   

 

This 

MASTERFORCE™

 brand power tool carries our famous No Hassle 3-Year Limited Warranty to the 

original purchaser.    If the tool fails within three (3) years from the date of purchase, simply bring this tool 
and its sale receipt back to your nearest  

 retail store for a free equivalent replacement 

within those three years.  Notwithstanding the foregoing, this limited warranty does not cover any 
damage that has resulted from abuse or misuse of the Merchandise.  This warranty: (1) excludes 
expendable parts including but not limited to blades, belts, bits, light bulbs, and/or batteries; (2) shall be 
void if this tool is used for commercial and/or rental purposes; and (3) does not cover any losses, injuries 
to persons/property or costs.    This warranty does give you specific legal rights and you may have other 
rights, which vary from state to state.    Be careful, tools are dangerous if improperly used or maintained.   
Seller’s employees are not qualified to advise you on the use of this Merchandise.  Any oral 
representation(s) made will not be binding on seller or its employees.  The rights under this limited 
warranty are to the original purchaser of the Merchandise and may not be transferred to any subsequent 
owner.  This limited warranty is in lieu of all warranties, expressed or implied including warranties or 
merchantability and fitness for a particular purpose.    Seller shall not be liable for any special, incidental, 

r consequential damages.    The sole exclusive remedy against the seller will be for the replacement of 

able to replace this product or is willing 

ce purposes, seller is not allowed to 

emonstrate any of these power tools for you. 

lease Call Toll Free at:    1-888-315-3080 (M-F 8am – 5pm) CST 

AVE YOUR RECEIPTS.    THIS WARRANTY IS VOID WITHOUT THEM.     

 

 

 

 

Printed in China 

 
 

 

o
any defects as provided herein, as long as the seller is willing or 
to refund the purchase price as provided above.  For insuran
d
 

or questions / comments, technical assistance or repair parts –   

F
P

 

S

 
 
 
 
 
 
 
 
 
 
 
 

240-0041   

 

  (888)315-3080                 

25

Summary of Contents for 240-0041


























Reviews: