41
USING THE SIDE BURNER
WARNING: IMPORTANT!
USING THE SIDE BURNER:
Inspect the gas supply hose prior to turning the gas
“ON”. If there is evidence of cuts, wear or abrasion,
it must be replaced prior to use. Do not use the side
burner if the odor of gas is present.
WARNING:
Always keep your face and body as far
away from the burner as possible when lighting.
LIGHT THE SIDE BURNER:
1. Read instructions before lighting.
2. Open lid during lighting.
3. Ensure knobs are in “OFF” position.
4. Turn on the cylinder valve.
5. Push and turn control knob counter-clockwise to
“MAX” position until click is heard and burneris lit.
Then release knob. Adjust the flame by turning
control knob between “MAX” and “MIN” positions.
6. If ignition does not occur in 5 seconds, turn the
burner control off, wait 5 minutes, and repeat the
lighting procedure.
7. To turn off, turn control knob clockwise until it locks
in “OFF” position.
MATCH LIGHTING THE SIDE BURNER
1. Open the lid to the side burner before lighting.
2. Be sure turn the burner control knob to "OFF".
3. Strike and carefully place a match approximately
1/2" (1 to 2 cm) from the burner. the match should
be inserted into the match stick lighter prior to
lighting the match.
4. Turn the side burner control knob to the "MAX"
position. The burner should light within 5 seconds.
5. If the burner does not light, turn the control knob to
"OFF" and wait 5 minutes for gas to dissipate and
repeat lighting procedure.
6. If the burner does not light within the first few
attempts of match lighting, there is a problem with
the gas supply. Turn off the gas at the burner and
cylinder. DO NOT attempt to operate the grill until
the problem is found and corrected. See "Trouble
Shooting" section of this manual on page 46.
