Amate Electroacústica,s.l.
MA206/MAW115.Version 1.3
Nov 08
15
5.-SYSTEM CONNECTIONS
As an example, let us start with an 8
MA-206
cabinet configuration (including 2 units
of
MA-206/D
and 6 units of
MA-206/P
). All the rest of configurations may be deduced
from this base system.
Each set includes a FACTORY PRESET which can be modify through the control
software or the in-built rear digital screen.
A sound system must be switched on sequentially. Firstly switch on the sound
sources such as CD players. Then, the mixer and finally the self-powered cabinets. If
you are using several units it is recommended that you switch them on sequentially
one at time.
If you are not using
MA-206
in combination with low frequency reinforcement units,
plug the output of mixer into the first unit of
MA-206/D
Input. (Fig.9.
INPUT SIGNAL
(C)).
Daisy chain the first unit of
MA-206/D
with the second unit of
MA-206/D
through
LINK INPUT SIGNAL
connectors.
Feed the first unit of
MA-206/D
through
AC INPUT
connector (Fig.9.(E)). and simply
daisy chain the second unit of
MA-206/D
through
AC STACKING OUTPUT.
Connect the 3 signal outputs from the
MA-206/D
(Fig.9.(H)) to the Speakon inputs of
each
MA-206/P
.
For the DSP control via PC/Laptop simply connect the PC output to the
RJ45 INPUT
(Fig.9.(A)) of the first
MA206/D
unit and daisy chain the signal to the second of
MA206/D
unit through
RJ45 LINK
(Fig.9.(B)).
