Amate Electroacústica,s.l.
MA206/MAW115.Version 1.3
Nov 08
16
Fig.15.
8xMA-206
Connections
6.FLYING SYSTEM
Flying an
MA
system is easy, fast and secure. To perform any operations related to
flying the system, read the present document, and act on the warnings and advice
given.
Only experienced installers with adequate knowledge of the system and local safety
regulations should fly speaker cabinets.
It is the user's responsibility to ensure that the systems to be flown and the flying
accessories (such as chains, eyebolts, lock pins...) comply with state and local
regulations. They should be regularly inspected and replaced if in doubt.
When flying enclosures from ceiling support structures, extreme care should be taken
to assure the load bearing capabilities of the structures. Do not fly systems from
unsafe structures.
All flying accessories that are not supplied by
Amate Electroacústica
are the user's
responsibility. Use at your own risk.
Remember that no risks should be taken with regards to public safety.
6.1.Description
Each
MA-206
cabinet includes flying structures on the front-lateral sides and on the
back side. These structures are manufactured from stainless steel; they are affixed
with special crop resistant screws. The front structures are used to vertically join the
cabinets; the back structures are used to vertically join the cabinets and to tilt them.
Angles can be changed from 0º to 8º. To safely lock the guides, the lock pins
supplied must be used.
