3.8.Motor control
Depending on which the digital system you are utilizing different speed steps can be used. The more steps you
use the smoother the throttle works. In garden G-Scale 14 speed steps are used and 28 speed steps are
recommended when supported by the digital system.
•
The direction of driving (including the direction related functions) can be defined by setting CV29 - bit0
accordingly.
•
Three settings of speed control are available:
14 speed steps (CV29 – bit1 = Off)
28 speed steps (CV29 – bit1 = On)
128 speed steps (is detected automatically)
Using the eMOTION XLS Sound Decoder with LGB
®
MTS I or II requires a 14 speed step setting. This is the
factory setting of the decoder.
Several CV settings in the eMOTION XLS Sound Decoder influence the acceleration and deceleration
characteristics of the locomotive. The acceleration/deceleration characteristic is defined by 2 CVs:
•
Acceleration delay (CV3)
•
Deceleration delay (CV4)
The time lag between speed 0 and the maximum speed (or reverse) is 0.5 sec if the setting is “1”, maximum
possible is 128 sec (setting “255”). Simply divide your desired time delay by “2” to acquire the respective CV
setting.
eMOTION XLS Sound Decoder 11
Illustration 11: Connection Scheme for Reed Contacts