7
PC-Modul) an.
•
Update
: Anschluss für den „Fast-
Update“-Ausgang des PC-Moduls
mit dem beiliegenden Kabel an.
•
Betriebsartenschalter:
Auswahl
der gewünschten Betriebsart:
Gleis, Programmieren und Update
(siehe Beschriftung)
•
Pufferanschluss (+,-,BC):
Powercap-Anschluss (Massoth)
•
Takt (Clk)
: Anschluß für einen digi-
talen Drehzahlgeber (824203x)
•
Reedschalter (2K1)
: Anschluß für
eine Reedkontaktplatine (8242020)
zur Soundauslösung.
•
Lautsprecher (LS1)
: Anschluß für
einen Lautsprecher.
•
Lautsprecher (LS2)
: Anschluß für
einen 2. Lautspr., falls unterstützt
•
Funktionsausgang (A1)
: Anschluß-
möglichkeit für einen Automati-
schen Entkuppler (8414002)
•
Lautstärkeregler (Poti)
: Anschluß
für einen einen Regler (8242010).
•
Busanschluss (Susi)
: Anschluß
von SUSI-Komponenten (z.B.
Soundmodul) oder FastUpdate.
•
Servos (SV1/SV2)
: Anschluß für 2
Modellbauservos.
•
Motor:
Anschlußmöglichkeit für
einen echten Modellbahnantrieb
(Motor = äußere Pins)
Achtung: Hier darf kein 2. Gleis-
anschluss vorgenommen werden!
Module).
•
Update:
Connection for the
“FastUpdate”-Output of the PC
Module with the provided cable
•
Mode Switch:
Selection of the
desired operation mode: Track,
Programming or Update
(check board printing)
•
Buffer Connection (+,-,BC):
Powercap Connection (Massoth)
•
Clock (Clk):
Connection for a Hall
Sensor (824203x)
•
Reed Contact (2K1):
Connec-
tion for a Reed contact board
(8242020) for sound triggering.
•
Loudspeaker (LS1):
Connection for a Loudspeaker
•
Loudspeaker (LS2):
Connection
for a second Loudsp. if supported
•
Function Outputs (A1):
Connec-
tion for an Automated Uncoupler
(8414002).
•
Volume Control (Poti):
Connection
for a Volume Control (8242010).
•
Bus Connection (Susi):
Connec-
tion for SUSI-components (e.g.
Sound Module) or FastUpdate
•
Servos (Sv1/Sv2):
Connection for
2 Servo controls
•
Motor:
Connection for a real motor
block (Motor two outer pins)
Attention: Do not connect a sec-
ond Track connection !!!