9
546565.A.3 - May 2019
STEP 6. ATTACH THE FAT TRAY BRACKETS.
Attach the left and right Fat Tray Brackets (15/16) to the left and right side panels with two M6*12mm screws (B) on each side, as shown.
Step
5 Attach the Grease Cup Bracket and Cabinet Top Panel.
a) Attach the grease cup bracket (27) to cabinet top panel (13) with five M4*8mm
screws (G).
b) Attach the cabinet top panel assembly to left and right side panel. Push the
side panels outwards gently to fit the top panel. Use two M6*12mm screws (B) at
the back and keep the screws loose, then use three M4*8mm screws (G) at the
front.
c) Tighten all screws.
Step 6 Attach the Fat Tray Brackets
Attach the left and right Fat tray Brackets (15/ 16) to the left and right side panels
with two M6*12mm screws (B) on each side, as shown.
STEP 7. FIT THE FAT TRAY.
Make sure the drain hole in the fat tray lines up with the drain hole in the top panel.
Step 7 Fit the Fat Tray.
Make sure the drain hole in the fat tray lines up with the drain hole in the top
panel.
Step 8 Attach the Doors.
a) Attach door hinges (22) to the cabinet left (7) & right (8) side panels top and
bottom, each hinge with four M4*10mm screws (C).
b) Attach the doors (11) to the hinges with two M4*10mm screws (C) on each
hinge.
Summary of Contents for Barbecues
Page 27: ...27 546565 A 3 May 2019 ...
