11
546565.A.3 - May 2019
STEP 10. ATTACH THE FIREBOX. (USE TWO PEOPLE FOR THIS STEP)
a) Place the firebox and hood assembly (1) onto the cabinet, then carefully open the hood while holding the assembly steady.
b) Fix the firebox onto the cabinet from inside the firebox with four M6 washers (F) and M6*12mm screws (B).
c) Fully tighten all screws.
Step 9 Adjusting the Door Gap.
There are 2 adjustable screws on each door hinge, use them to adjust the door
gap if required.
Note: It is better to wait until the unit is fully assembled and in position before
finally adjusting the doors.
Step 10 Attach the Firebox. (Use two people for this step)
a) Place the firebox and hood assembly (1) onto the cabinet, then carefully
open the hood while holding the assembly steady.
b) Fix the firebox onto the cabinet from inside the firebox with four M6 washers
(F) and M6*12mm screws (B).
Fully tighten all screws.
STEP 11. REMOVE THE SIDE BURNER.
Remove the trivet from the side burner assembly (2), then remove the three M4*10mm screws and fiber washers on the side shelf to
release the spill tray and burner.
Keep the trivet, screws and side burner aside for Step 16.
Step 11 Remove the Side Burner.
Remove the trivet from the side burner assembly (2), then remove the three
M4*10mm screws and fiber washers on the side shelf to release the spill tray
and burner.
Keep the trivet, screws and burner aside for STEP 16.
Step 12 Attach the Side Burner Control Panel and Side Shelf Front Panel
a) Attach the side burner control panel (3) to the side burner shelf (2) with four
M4*8mm screws (G).
b) Attach the right side shelf front panel (5) to the right side shelf (4) with four
M4*8mm screws (G).
Summary of Contents for Barbecues
Page 27: ...27 546565 A 3 May 2019 ...
