546877 - Masport Aerocore Battery Charger Owner’s Manual - December 2020
3
Safety warning
WARNING Read all safety warnings and all
instructions
. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference
.
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not
play with the appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
1. Before charging, read the instructions.
2. For charge Li-ion battery pack only.
3. Do not charge a leaking battery.
4. Do not use chargers for works other than those for which
they are designed.
5. Before charging, ensure your charger is matching the local
AC supply.
6. The charging device must be protected from moisture.
7. Do not use the charging device outdoors.
8. Do not short out the contacts of battery or charger.
9. Respect the polarity “+/-“ when charging.
10. Do not open the unit and keep it out of the reach of
children.
11. Do not charge the batteries of other manufactures or ill-
suited models.
12. Ensure that the connection between the battery charger
and battery is correctly positioned and is not obstructed by
foreign bodies.
13. Keep battery charger’s slots free of foreign objects and
protect against dirt and humidity. Store in a dry and frost-free
place.
14. When charging batteries, ensure that the battery charger
is in a well-ventilated area and away from inflammable
materials. Batteries can get hot during charging. Do not
overcharge any batteries. Ensure that batteries and chargers
are not left unsupervised during charging.
15. Do not recharge non-rechargeable batteries, as they can
overheat and break.
16. Longer life and better performance can be obtained
if the battery pack is charged when the air temperature is
between 18℃ and 24℃. Do not charge the battery pack in
air temperatures below 0℃, or above 40℃. This is important
as it can prevent serious damage to the battery pack.
17. Charge only battery pack of the same model provided by
Masport and of models recommended by Masport.
Product Specifications
Product
Aerocore Battery Charger
ACG6025H / 553157
Charger Input
100-240V ~ 50/60Hz
Charger Output
60V 2.5 A
Charger Battery
Li-ion
Charging Time (approx.)
Battery Pack
553155 / ABP6025SH
1 hr
Battery Pack
553156 / ABP6050SH
2 hrs
Protection Class
/ II
Machine Weight
0.5kg (Charger Only)
Product Diagram
1.
Battery pack (not included)
2.
Charge indicator light
3. Charger
Operation
BEFORE PUTTING INTO OPERATION
1. CHARGING THE BATTERY (SEE FIG. B)
a.
The battery in your new tool is not charged when it leaves
the plant; therefore, it must be full charged before using the
first time.
b.
If the battery pack is very hot, remove the battery from the
charger and allow it to cool to ambient temperature before
attempting to recharge.
c.
To prevent damage to the battery pack, please charge the
battery to full or no less than half charge before storage.
d.
If the tool will not be used for long periods of time, charge
the battery pack every 3-6 months.
CHARGING PROCEDURE
1)
Plug the charger into an appropriate outlet.
2)
Slide the battery pack into the charger, and make sure
the battery is in the correct charge position firmly. The light
will begin flashing green to
indicate the charging process
has started.
3)
When charging is
completed, the light will turn
solid green.
4)
After the battery is fully
charged, unplug the charger
and remove the battery pack.
