O3® Regional Oximeter
Chapter 3: Setting Up the O3® System
www.masimo.com
19
Masimo
Connecting the O3
®
Sensor(s) to the O3
®
Module
Up to two (2) O3
®
Sensors can be connected to each O3
®
Module. The two (2) connections are
symmetrical in orientation and clearly marked “1” and “2” on the module.
To connect an O3
®
Sensor to an activated O3
®
Module:
1.
Apply sensor on the patient. For more instructions on applying the sensor on the
patient, see the
Directions for Use
for the O3
®
Sensor series.
2.
Once the sensor(s) has been properly applied on the patient, identify the
connector end on the sensor, illustrated in the image below.
3.
Align the connector with the appropriate sensor connection on the module, as
illustrated in the image below. Note the markings of "1" and "2" above the
connections.
1 - Left Forehead
2 - Right Forehead