Masibus LC5248E-AT, User Manual

Page: 15 / 44

Model: LC5296-AT /LC5248E-AT/LC5296V-AT
masibus
Doc. Ref. no. : - m61C/om/301
Issue no. 13
User’s Manual
Page 15 of 44
SET-1 Key
(Menu /
Enter
Key)
 For Linear Output, Shows Alarm Set Point-1(A1.SP), if
pressed in RUN mode. And if pressed for few seconds
shows Control Set Point-1(C1.SP).
 For Other Output Type, shows Control Set Point-1(C1.SP),
if pressed in RUN mode.
 In Sub Menu it can be used to get to the next Parameter.
 It is also used to save the parameters to nonvolatile
memory, when user setting a proper data by Increment
and decrement key for parameter configuration.
SET-2 Key

Shows Alarm Set Point-2(A2.SP), if pressed in RUN mode.

Shows Sok.t(Run/stop) if pressed two times in RUN mode.
Auto/Man
ual Key

It is used to switch between Auto to Manual mode and
Manual to Auto mode if pressed for at least 2 sec if
function key is A/M.

Shows remaining soak time when pressed if function key is
selected SOK.T.
PV
(Process
Value)
Display
PV

4 digital 0.56 inch RED Display

Display process value.

Display parameter name when user set parameter.

Display error message when an error occurs.
SV
(Set
Value)
Display
SV

4 digital 0.4 inch GREEN
 Display set value.
 Display parameter value of parameter in process value
field when user set parameter.
 Display control output value when in manual mode.
Relay-1
Indication
RL1  ON when Relay-1 is energized & OFF otherwise.
Relay-2
Indication
RL2  ON when Relay-2 is energized & OFF otherwise.
SSR
Indication
SSR  SSR ON status.
MANUAL
Indication
MAN
 ON when unit is in Manual mode.
 OFF when unit in Auto Mode.
TX
Indication
Tx  ON when device is transmitting some Data (RS-485).
RX
Indication
Rx  ON when device is receiving some Data (RS-485).
5.3 Front Panel Description of LC5248E-AT/LC5296V-AT
Name of
Part
Symbol Function
Increment
Key
 Increment the Value of any Parameter.
 Shows ambient value for T/C Input in RUN mode.
 In Manual Mode this key is used to Increment the %Power.
Decremen
t Key
 Decrement the Value of any Parameter.
 Shows %Power value if Device is in Auto Mode in RUN
mode.
 In Manual Mode this key is used to Decrement the