Mash Five Hundred, User Manual

Page: 33 / 56

35
Substitution of the engine oil
The engine oil plays an important role in the normal operation of the engine
and for this reason it is necessary to check the engine oil periodically and to
renew it after the first 1000 km and then every 5000 km according to the
procedures The following.
Note: When draining, clean the dipstick and replace the oil filter.
Engine oil change
The engine oil must be replaced when the engine is still warm, in order to allow
a complete draining of the fluid.
To do this, proceed as follows:
1. Secure the bike by placing it in a vertical position
2. Remove the oil filler cap
3. Unscrew the drain screw and run the used oil
4. Replace the oil filter
5. Tighten the drain screw ( Tightening Torque : 20-30 Nm). Fill with 2.2L
new engine oil.
Before each use , check whether or not the engine oil level is among the lowest
and highest level of the oil ruler.
- Heat the engine to operating temperature
- Secure the motorcycle by placing it in a vertical position
- Stop the engine
- Check the oil level in the minute
Note: gauge level control (not screwed)
Caution
Carefully check for leaks around the oil filter cover.
Oil gauge
Oil drain screw