Mash Five Hundred, User Manual

Page: 21 / 56

23
V Correct driving
Caution
The engine can only be started when the gear is in neutral position or clutch is
OFF. Otherwise accident may happen.
Unnecessary long time idle running (especially at a high speed ) may be
harmful to the engine
To stop engine running:
you can also stop the engine running by turn the ignition key to “ ” position to
cut off all electrical power.
If the start fails
If the engine can’t be started, or the motorcycle is not moving, the points below
should be checked
：
·If there is fuel in the tank
·If the motorcycle is properly operated according to the instruction book shows
·If the fuse is melted
·If the engine start button is working properly
·If the battery is finished with power which cause the engine start button not
working, please try the kick start
Run-in of engine
Run-in of the engine is very important. Any operation without run-in (or
improper operation) will cause serious damages or failures of function
A. Engine without run-in and the one has been run in have big difference in their
power and torque performance.
B. The well run-in engine: the initial wear-out of the parts is well renewed, which
eases the damage to the parts in fierce movements, and extend the service life of
the engine.
C. Requirements
1). Never fully open the throttle when the new motorcycle has not been ridden
for more than 350km.
2). When riding in each gear, the speed should less than 80% of its allowed speed
(the opening of the throttle should be less than 80%), and shift the gear in time.
3). Do not let your engine bear too much load in the first 350km.