Mash Black Seven 250, User Manual

Page: 60 / 62

60
cylinders and brake calipers, under the fuel tank, chain of transmission ,
steering column bearings, gaskets, air box, wheel or swing arm bearings, all
electrical elements and also the air vents. Water infiltration could damage these
elements.
After use under normal conditions: clean with lukewarm water mixed with mild
detergent using a soft sponge and rinse thoroughly. A damp cloth placed a few
minutes on the parts having more stubborn stains and insects, will allow the dirt
to take off smoothly.
After use in the rain, near the sea or on salt roads: Clean the motorcycle with
cold water and mild detergent: do not use hot water, it will increase the
corrosive action of salt. Protect the vehicle from corrosion by spraying an anti-
corrosion and lubrication product on all metal surfaces, chrome-plated or
nickel-plated.
After cleaning:
Dry the body parts with a soft absorbent paper. After being dried with
disposable cloth, the drive chain should be lubricated with a specific lubricant to
prevent it from rusting.
It is recommended to rub the chrome or stainless steel elements (including the
exhaust system) with a chrome care product.
An anticorrosion product will spray on all metal surfaces, chrome or nickel
plated.
Lubricate all axes, pivots, bolts and nuts.
Apply wax on all painted parts.
Caution, Special precautions:
Never use lubricating or greasy products on the braking elements. This will
decrease braking efficiency and could cause an accident.
Always use a specific degreaser for braking systems.