Mash Black Seven 250, User Manual

Page: 59 / 62

Cleaning
Frequent and regular cleaning is an essential part for the maintenance of your
bike. The exposure to natural elements (sea breeze, sea water, salt road, sludge,
dust ...) and anti-slip additives spread over the roads in winter, can be a source
of vulnerability for the components of your motorcycle. Corrosion and rust can
occur even on good quality parts. The proper maintenance and regular cleaning
of your vehicle will extend the original appearance of the vehicle but also, are
essential in order to maintain the guarantee.
Precautions Before Cleaning:
Engine cold, protect the exhaust outlet with a suitable protection (example:
plastic bag) to prevent water from getting inside.
The exposed electrical elements must be covered with a plastic bag. Check that
the covers and caps are correctly positioned.
With a degreaser and a soft brush, remove any stubborn stains from the
crankcase, making sure that they are never applied to the sprockets, drive
chain, seals and wheel axles. . Rinsing residues and degreaser have to be done
with clean water.
Cleaning :
Cleaners that are too acidic or aggressive are not recommended for washing the
motorcycle. Especially for the axes, bearings, levers, pivots, wheels and spokes.
If however it is necessary to use for stubborn stains, respect the instructions
and time of application of the product. We recommend spraying an anti-
corrosion and lubrication product on these items after rinsing thoroughly with
water.
Plastic parts and windshields (for equipped vehicles) should be cleaned
preferably with water using a soft sponge or soft cloth. Only a mild detergent
may be used if some plastic parts cannot be cleaned properly. Rinse thoroughly
the product used: badly rinsed it could damage the plastic parts. The use of
other products on plastic parts is not recommended (thinner, solvent, gasoline,
antifreeze, abrasive cleaner ...).
Caution, Special precautions: Do not use pressure washer or steam jet: Avoid
directing the jet of water close to the following items: instrumentation,