Maserati MC20 2022, Owner'S Manual

Page: 191 / 288

5
187
Starting and Driving
vehicle will still be driveable and not
need towing, contact an
Authorized
Maserati Dealer for service as soon as
possible.
CAUTION!
•
Prolonged driving with the
Malfunction Indicator Light (MIL) on
could cause further damage to the
emissions control system. It could also
affect fuel economy and driveability.
The vehicle must be serviced before
any emissions tests can be performed.
•
If the Malfunction Indicator
Light (MIL) is flashing while the
engine is running, severe catalytic
converter damage could occur and
possible loss of power. Immediate
service is required at an
Authorized
Maserati Dealer
•
After the problem has been solved,
the
Authorized Maserati Dealer
personnel will perform specific tests
on the test bench for a complete
check of the system and, if necessary,
also road tests, even on long
distances.
Gasoline Particulate Filter (GPF)
To reduce the emissions of particulate
matter, the exhaust system is equipped
with a particulate filter optimized
for the back pressure and with a high
filtration efficiency.
This filter is maintenance-free and
self-regulating and therefore does
not require a regeneration procedure
when using the car. This performance
made possible by the improvement of
the filtering support between engine
and silencer.
Spare Parts
Use of genuine parts for normal or
scheduled maintenance and repairs
is highly recommended to ensure
excellent performance.
Damage or failures caused by
non-genuine spare parts used for
maintenance and repairs will not
be covered by the manufacturer's
warranty.
Driving on the Track
To perform extreme experience,
maximum power and lightning gear
shifting on track, switch the drive
mode selector on the central tunnel in
CORSA mode. (see "Drive Mode" in
this section).
NOTE:
Do not use the vehicle on track during
the break-in period.
WARNING!
• Before using the vehicle on track,
consult an Authorized Maserati
Dealer. Maserati recommends to
check the vehicle before and after
driving on track.
Before driving the car on the track and
pushing it to the limit is important
to make sure that all operating
parameters are correct by accessing