Maserati MC20 2022, Owner'S Manual

Page: 119 / 288

4
115
Instruments and Controls
user holds the MENU button, the
function will be switched off and the
instrument cluster does not show the
chrono content.
The parameters to manage the
chronometer function are the
following:
1.
Gap from best
2. Current
3. BEST
4. LAST LAP
5. Chronometer instruction
With the chronometer function on,
by pushing the MENU button, the
chronometer starts to take a lap.
Instrument cluster will show the time
progression and chrono information.
When the chronometer is recording
the lap/time, by pressing the MENU
button, the chronometer takes the lap:
• if the lap is the first, this shall take
the place of the 3 BEST lap and 4
LAST LAP;
• if it isn’t the first lap/time but it is
better than 3 BEST lap, it shall be
stored in 3 BEST lap and 4 LAST LAP;
• if it isn’t the first lap/time but it is
not better than 3 BEST lap, it shall be
stored in 4 LAST LAP only.
The area 1 Gap from best shows the
gap time between last and BEST
times. The number is green if the
time difference is negative (less time:
example shown in picture: -00.354),
red if is positive (longer time: example:
+00.354).
A long MENU button press stops the
chronometer: the current lap blinks for
2 seconds.
The user can resume the lap pressing
briefly the MENU button or reset the
chronometer with a long press of the
same button.
If the user resets the chronometer, all
the parameters shall be reset to “0”
value.
With a short press of the MENU
button, user will start a new lap
recording: with a long press, the
user can switch off the chronometer
function.
Chronometer Logic
The stopwatch will continue running in
the background even when another
menu screen is visualized. If not
stopped, after a maximum time the
stopwatch will stop and reset the data.
At each key off/key on, if the function
is active, the stopwatch visualization is
interrupted or stays paused if it was
paused. If user comes back to CORSA
mode, the chronometer shall not be
visualized. If the user presses the
MENU button, the instrument cluster
will show the chronometer with the
last recorded time values and paused
current lap recording.