Maserati Levante 2019, Owner'S Manual

Page: 44 / 454

2
44
Before Starting
2. Press the upper or lower
buttons and keep it pressed for 3
seconds.
3. Release the button (pressed in
the previous point). Upon the
following opening controls, the
liftgate will stop in the stored
position.
If you want to reset the maximum
possible opening position of the
liftgate, proceed as described below
starting from the previously set
opening position.
1.
Manually push the liftgate to
the maximum possible opening
position.
2. Repeat the previously performed
steps 2 and 3.
Power Liftgate/Hands Free Automatic
Safe Movement
Power liftgate/Hands free safe
opening and closing is ensured by
a protection system able to stop
its movement when an obstacle
is detected along the path:
when opening or closing, it stops
automatically and then slightly moves
back.
Along the upper outer edges, the
vehicle can be equipped with anti-
pinch protection sensors. These sensors
stop the automatic closing stroke
and partly open the liftgate when a
pressure is carried out, also slight,
within their range shown in the figure.
After the closing command, when
power liftgate/Hands free starts
closing, all the indicators will blink to
warn anyone within range.
When power liftgate/Hands free
edge reaches the car body, the
motor locking the latch is activated
automatically.
If necessary, the power liftgate/Hands
free can also be opened or closed
manually. This operation could be
required when the liftgate remains
open for a long period of time.
NOTE:
Frequent activations of the anti-pinch
protection function may disable the
automatic movement of the liftgate.
To reactivate this function, perform a
reset cycle by carrying out a complete
opening/closing sequence, after
manually closing the liftgate.
WARNING!
•
Activate power liftgate/Hand free
only when vehicle is at a standstill.
• Always pay utmost attention when
opening and closing the liftgate.
If for any reason the protection
system might fail to respond, it could
cause injury to anyone within the
operating area.
•
After the closing command, always
make sure that power liftgate/Hand
free is completely closed.
CAUTION!
• Under extreme weather conditions,
liftgate seal could freeze and
compromise power liftgate/Hand free
automatic opening and closing.
• Before opening power liftgate/Hand
free, make sure that no objects or
snow are set on liftgate or might jam
or prevent its opening.
Hands Free Power Liftgate Release
and Closing
This mode is controlled by the “Passive
Entry” system (see paragraph “Passive