Maserati Levante 2019, Owner'S Manual

Page: 220 / 454

4
220
Dashboard Instruments and Controls
Once you have entered the rear
climate screen, by touching the
following soft-keys, the driver is able
to:
1 The A/C compressor will turn on.
2 The system switch the ATC
between manual and automatic
mode by controlling the interior
temperature (controls
3 , 4 ) by
adjusting the air flow rate and
the air distribution (controls
5 ) of
the rear passengers.
3 Adjust the temperature in the
left rear zone in the indicated
mode for the front zones.
4 Adjust the temperature in the
right rear zone in the indicated
mode for the front zones.
5 Set the airflow distribution in
“Torso”, “Bi-Level” or “Floor”
mode.
6 Synchronise the two rear
passenger temperature
setting. If the driver adjust the
temperature while SYNC mode
is on, this will affect the rear
passenger temperature. If the
front or rear passengers adjust
the temperature setting the
system automatically break the
function and turn it off.
7 Set the blower speed through
seven speed levels.
8 Re-activate the rear climate
setting.
9 Turn off the rear climate option.
10 Block the settings of the rear
climate.
11 Return to the front climate
control screen.
Operating Tips
• Continuous use of the air
recirculation in winter, in rainy
weather or humid climate is not
recommended because it may cause
window fogging.
• Interior fogging on the windshield
can be quickly removed by fast
defrosting/demisting. The “Mix”
mode can be used to maintain a clear
windshield and provide sufficient
heating. If side window fogging
becomes a problem increase blower
speed.
NOTE:
• Recirculation mode without A/C
should not be used for long periods
of time, as fogging may occur.
• If inside the passenger compartment
there are conditions of high
temperature and humidity, when the
A/C compressor is switched on (A/C
soft-key illuminated on MTC+ display
or LED on climate control panel A/C
button ON) there may be some cold
steam at ventilation port outlet:
this situation is normal and does