Maserati Grecale 2023, Owner'S Manual

Page: 98 / 302

4
96
Dashboard Instruments and Controls
CURRENT CONSUMPTION
Consumption instantaneous value,
according to currently selected unit
of measurement, is visualized both
in numbers and with a bar graph. The
average value, based on Trip A, can be
substituted by dashes “--.-“ after a reset
or if data are not available.
When speed is equal to 0 mph or km/h
or when the gas pedal is not pressed
or if the signal is not available, the
gauge is empty and the instantaneous
value is represented as dashes “--.-“.
Exceeding the maximum scale limit, the
instantaneous numerical value shall be at
least the upper limit of the scale.
TRIP A / TRIP B (when active)
Trip displays data of user’s voyage. Trip
A format is identical to Trip B except
for the fact that Trip A is set as default,
Trip B not (It is possible to enable it from
MIA Display. See “Functions of Settings
Menu on MIA” in this section). The trip
area displays the following parameters:
• Trip A or Trip B label
• Trip distance
• Trip timer
• Average trip consumption
NOTE:
• Distance, elapsed time, average
consumption and average speed can
be reset only on Main Menu Screen.
After a reset, or if the signal is not
available, the value of the related items
should be replaced with a dash “-“ for
each digit, except for the elapsed time
that will restart from 00:00.
• Cluster displays “- -” in place of value
for Average Trip consumption and Trip
Distance if cluster does not receive
signal.
TORQUE MANAGEMENT
Instantaneous engine torque is
represented by the filling of the gauge
near each wheel. If the signal is not
available the graphic is greyed out.
The widget shall have 50% of torque on
the front axle (25% for each wheel) and
100% on rear axle (50% maximum for
each rear wheel) as a maximum value.
The arrows shall follow the current
Torque value (example: if torque is 0, no
arrow is shown).