Maserati Grecale 2023, Owner'S Manual

Page: 135 / 302

4
133
Dashboard Instruments and Controls
lever towards the steering wheel, the
lights remain on while you are operating
the lever.
Direction Indicators
Move the left multifunction lever all the
way up or down until the stop trigger;
the
left or right indicator light
on the lateral sectors of the instrument
cluster flashes to show proper operation
of the front and rear direction indicator
lights.
To activate lane change function, tap
the lever up or down once, without
moving beyond the detent. The direction
indicators (right or left) will flash three
times then automatically turn off. This
function is useful when overtaking or
changing lanes.
NOTE:
• If either light remains on and does not
flash, or flashes at a fast rate, check for
a defective outside light. If an indicator
on instrument cluster fails while
moving the lever, then the direction
indicator is probably defective.
• The message that a turn signal is on
will appear in the instrument cluster
and a continuous chime will sound if
the vehicle is driven more than 1 mile
(1.6 km) with either direction indicator
on.
Lights Failure Messaging
The failure conditions (example: “High
beams fail service required”, “Right
turn signal light out”, etc..) are notified
on instrument cluster with a pop-up
message and with the switching on of
the dedicated warning light, if present.
In these cases, contact an
Authorized
Maserati Dealer .
Internal Light Controls
Dome Console Lights
The dome console includes two lateral
lights and the related control buttons
and two anti-theft sensors (
)
Both the lateral lights automatically turns
on when one of the doors is opened and
turns off when the door is locked and
the ignition device is in
ON position and
if the greeting lights are active on the
MIA screen (see paragraph "Functions
of Controls Menu on MIA" in section
"Instrument and Controls"). The light may
be switched on manually by pressing
both buttons.
The switching on and off of the
lateral lights can be controlled by the
respective buttons (reading function).
Pressing a single button will switch on
the respective front light.
The central button on the dome console
switches on all compartment lights.