Maserati Grecale 2023 Owner'S Manual Download Page 194 | Manualshive

Page: 194 / 302

background image

6

192

Driver Assistance Systems

middle one and two arcs in the lateral
ones.
The system will indicate a detected
obstacle by displaying arcs with
fixed light and a characteristic sound
according to the obstacle distance. The
color indicates the distance and the arc
indicates the position of the detected
obstacle. The yellow color of the outer
arc indicates the maximum distance, the
orange color of the middle arcs indicates
the medium distance, while the red color
of the nearest arc indicates the minimum
distance. The front maximum detection
distance is 4.9 ft (1.5 m), while the rear
maximum detection distance is 6.6 ft (2
m).

NOTE:

When an obstacle is detected outside
the vehicle path, the system displays
grayed arcs and the chime will not be
active.

As the vehicle moves closer to the
object the MIA screen will display the
arc moving towards the vehicle and the
sound tone will change from single to
slow, to fast and to continuous.
The vehicle is close to the obstacle when
the MIA screen displays one red arc only,
combined with a continuous sound.

NOTE:

•

When in D (Drive) mode, if previously
not in R (Reverse) mode, the front

detection system will active only the
two arcs closer to the bumper.

•

Park Assist will turn off the front park
assist audible alert (chime) after
approximately 3 seconds when an
obstacle has been detected and the
vehicle is stationary.

Enabling and Disabling Park
Assist

By accessing the submenu “Safety &
Driving Assistant” from MIA system, the
“Park Assist” can be enabled or disabled
(checkbox “On/Off”). The available
options regarding the warning alerts
sound are: “Low”, "Medium" or “High”.
Also front sensors can be disabled
unchecking the "Front Sensors Active
in Drive" box in the setting list. Refer to
“Functions of Settings Menu on MIA”
in section “Dashboard Instruments and
Controls” for further information.

NOTE:

If "Front Sensors Active in Drive" setting
is not selected, but "Park Assist" is
active, front sensors will be re-activated
in the current maneuver when in R
(Reverse) mode until the vehicle speed is
below 7 mph (11 km/h) in Drive gear.

If the vehicle speed is below 7 mph (11
km/h), park sensors can be enabled or
disabled for the current maneuver at

«
...
192
193
194
195
196
...
»

Summary of Contents for Grecale 2023















































































































































































































































































































Reviews:

No comments

Related manuals for Grecale 2023

Brand: GMC Pages: 140

Brand: PAC Pages: 15

Brand: Jeep Pages: 25

Brand: Jeep Pages: 51

Brand: Farenheit Pages: 8

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

Brand: Parrot Pages: 19

Brand: Parrot Pages: 88

Brand: Parrot Pages: 2

Brand: Parrot Pages: 2

CK 3000 Evolution

Brand: Parrot Pages: 8

CK 3000 Evolution

Brand: Parrot Pages: 106

Brand: Metra Electronics Pages: 12

Brand: Halfords Pages: 4

Wireless Charging Station Universal

Brand: BMW Pages: 160

STEALTH POWER RBP-216-SP

Brand: RBP Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands