ISTRUZIONI PER L’OPERATORE
Pagina 3
3. ELECTRONIC SYSTEM
The electrical cables must be connected as shown below. In order to ensure
protection against water and correct operation, be sure to connect the connectors
correctly.
The system power connector (J4) must be connected to the appropriate socket on
the tractor. If it is not present, it is necessary to purchase, from the retailer or the
manufacturer, the appropriate wiring to be connected to the tractor battery, in order
to power the machine's electronic system. This wiring must be installed by qualified
personnel.
J4:
power supply
J5:
to this connector the coiled cable of the display
J6:
connect here the cable to detect speed (or phonic wheel or ISO 11786 cable). If
you have ISO 11786 in the tractor, use the cable in the following picture
.
Of this cable you plug the connector with the written "THEOR. SPEED" to J6.
Pay attention: "THEOR. SPEED" connector has a protection against dust and wa-
ter.Remove and plug it into the "TRUE SPEED" connector.
Connect cylindrical connector the display
J4
J6
J5
