Wrapper
5100
fig. 27 – Re-positioning
In case of doubts about functioning do not
hesitate to contact your area concessionaire for
explanations; we remember you that a correct
functioning is the better guarantee for life of the
machine.
4.10 SIDEWAYS TIPPING UP
SYSTEM
The rear platform allows to tip up the bale on a
side during unloading step.
As on bale sides there are more film layers than
on the circumference, this way of unloading gives
advantages of more protection in case of working
in a uneven and with blades of grass soil.
The modification of unloading way is carried out
by change of position of the platform rafter. For
the normal unloading it has to be horizontal (fig.
28), but for the tipping up on a side it has to be
vertical (fig.29).
To modify the unloading way proceed as follows
(fig.29):
-
Remove the pin (S)
-
Partially unthread the rafter
-
Insert the rafter in vertical/horizontal position
inserting the pin (P) in the right/left hole
-
Insert the pin (S).
fig. 28 – Normal unloading
fig. 29 – Tipping up on a side
When the rafter is in vertical position, during the
lowering of the platform it leans on the mat that
supports the bale and is hinged on the opposite
side.
In the last step of the platform lowering has given
a sideways inclination of the mat that allows the
tipping up of the bale on a side.
Before unloading make sure there are no
people, animals or obstacles of any nature
around the working area, which can be in
danger during unloading.
DANGER
The dangerous area, which has to be
controlled, has to be sufficiently wide to
consider the possible rolling of the bale after
unloading.
USE & MAINTENANCE MANUAL
- 28 -
