Z3
QR20
4
5
28
34
11
SPRING CHANGE
FIG. 1
Unscrew the caps
(4)
with a 21 mm
socket wrench.
Remove the caps complete with O-ring
(5)
from the stanchions.
FIG. 2
Push the stanchions into the sliders and
remove the lower washer
(11)
and the
spring
(34)
from each fork leg.
Drain all oil from the fork legs.
WARNING:
Remember to always
recycle any used oil.
To change the fork leg oil follow the
procedure as described in section
“REASSEMBLY” from Fig. 27 to Fig. 29.
PILOT BUSHING AND SEAL
ASSEMBLY CHANGE
FIG. 3 (only right leg)
Turn fork legs upside down and press
adjuster retainer
(28)
with a small screw-
driver to release it. Remove adjuster as-
sembly
(28)
from the slider.