Z3
QR20
3
C
ADJUSTMENT
SPRING PRELOAD
Spring preload determines COMPRES-
SION damping and is adjusted by turning
the adjustment knob
(3)
on the top of the
fork legs. From the factory the fork is set at
minimum preload, i.e. the adjustment knob
completely unscrewed counterclockwise.
However, springs are slightly preloaded
to counteract static loads. By turning the
adjustment knob clockwise, the preload is
increased up to the maximum value equal
to 15 mm spring preload. This adjustment
is essential in order to have the right fork
response for the rider’s weight and riding
style.
REBOUND ADJUSTMENT
Right slider botom is equipped with an
adjuster screw
(C)
for REBOUND damp-
ing.
To adjust, always start from the minimum
damping setting, i.e. with the screw fully
turned counterclockwise. Each adjusting
position can be identified by a click.
IMPORTANT:
do not force the adjuster
knob
(C)
over its limit.