Install the fork onto the frame already equipped with steering set.
Install the top crown onto the sliders and the steer tube.
Check that the top face (
C
) is lined up with or above the innermost point of contact (
D
) between top
crown and sliders.
If the sliders come out too much, put some shims (
2
) onto the crown in correspondence of the steer tube.
If the position of the crown with respect to the sliders has been changed, restore the original distance
"D"
.
After tuning the steering set, tighten screws (
3
) onto the top crown to the recommended tightening
torque (
10 Nm ± 1
).
Over-tightening screws (3) can deform the tubes and weaken the structure.
Tighten the steer tube fixing screw (
4
) to the recommended tightening torque (
10 Nm ± 1
).
© Marzocchi Suspension
2005
-
Shiver DC
