Monster
T
5
6
43
9
1
8
22
21
FIG. 4
Position the plunger (
7
, see exploded view),
into the cap, to the minimum preload value.
Push down the stanchion tube.
Lock the check nut
(43)
and remove the cap
(5)
from hydraulic cartridge top.
FIG. 5
Remove the upper washer
(8)
, the preload
sleeve
(1)
and the spring
(9)
.
Let all the oil drain into the fork leg. By
following this procedure, there is no need to
check the oil level. Make all necessary
changes.
HYDRAULIC CARTRIDGE CHANGE
FIG. 6
Let all the oil drain out.
WARNING:
Remember to always
recycle any used oil.
To change the fork leg oil follow the proce-
dure as described in REASSEMBLY from
FIG. 24 to FIG. 29.
Turn the fork leg upside-down and unscrew
the foot nut
(22)
complete with O-ring
(21)
by the use of a 15 mm socket wrench.
