Monster
T
13
32
13
34
15
16
A
FIG. 10
A sleeve
(33)
is located inside the stan-
chion tube. Remove the outer snap ring
(32)
to remove the sleeve
(33)
. Should the
guide bushing
(34)
be damaged, remove
it from the stanchion
(13)
inserting a small
screwdriver into the bushing slot.
FIG. 11
Remove the stop ring
(15)
from the slider
by placing the screwdriver bit in one of the
three openings on the stop ring and care-
fully lifting the ring out of place.
IMPORTANT:
when removing the stop
ring, make sure not to damage its seat.
FIG. 12
Fit the slider protector
(A)
onto the slider
and remove the oil seal
(16)
with the help
of a large slot screwdriver.
IMPORTANT:
when removing the oil seal,
make sure not to damage its seat. Once
removed, the oil seals should not be used
again.
