Fetus Camera Model M1
70
Page
9 Storage, Cleaning and Maintenance
Daily storage and protection
The camera is a precision device. When not in use, please put the
camera back in the packing box;
The sensor at the bottom of the camera is a core component, so please
take care not to let it be hit, dropped, etc.
Do not scratch/pierce the camera with sharp objects;
Avoid contact with corrosive harmful substances;
Avoid foreign matter such as water, dust, insects, etc., into the heat
dissipation hole;
Do not leave the camera in a damp environment;
Do not place the camera in an environment where the temperature is
above 55°C or below -20°C.
Cleaning and maintenance
Cleaning tools: wiping cloth, detergents, clean water
Cleaning steps:
Turn off the camera before cleaning;
Clean the dust: Moisten the wiping cloth with water, and wring the
water out to gently wipe the surface, and then wipe the water with a dry
wiping cloth or paper towel;
Clean the dirt: Dip a small amount of detergent with a wiping cloth,
and gently wipe the dirt area. After removing the dirt, moisten the wiping
cloth with water, and wring the water out to gently wipe again, and then
wipe the water with a dry wiping cloth or paper towel;
Clean the heat dissipation hole: If dust or foreign matter blocks
