63
Page
Fetus Camera Model M1
early stage, you can supplement it for a while by drinking soup, etc.,
and you may take an ideal photo later;
ii.Adjust parameters: try to adjust the filter or light effect to see if there
is improvement;
iii.Change the shooting angle: Place the camera in a soft position
around the fetus head and gently press or tilt the camera angle.
3) The fetus is too active: when the positioning of the finder frame
and the split line is completed in the early stage, if the fetus moves or
turns during the three-dimensional imaging, it may result in blurred or
invisible images;
Advice: The pregnant mother can sit for a while and calm the fetus by
appeasement, etc.
4) The fetus is facing away from the outside: If the fetus head back is
facing outward (mother's belly), the face is not visible.
Advice:
i.Walk around: Move or climb the stairs within the range that you can
afford to make the fetus turn and change position;
ii.Interaction: Pat the belly gently and communicate with the fetus to
make him/her change position.
5) There is occlusion in front of the fetus: when there is a hand, foot
or umbilical cord in front of the fetus, the face picture taken will be
blocked by hands and feet or the umbilical cord. Thud the fetus face
will be not full or unclear.
