Troubleshooting
Problem
Cause
Action
Engine Will Not Start
STOP switch set to off position
Move switch to on position
Empty fuel tank
Fill fuel tank
Primer bulb wasn't pushed enough
Press primer bulb until fuel flows
through fuel return line
Engine flooded
Use warm engine starting procedure
Engine Will Not Idle
Idle speed set incorrectly
Set idle speed
Engine Lacks Power or Stalls When Throttle wire has come loose
Tighten throttle wire
Cutting
Dirty air filter
Clean or replace air filter
If further assistance is required, contact your local authorized Maruyama service dealer.
Specifications
.
Weight
Engine Displacement
Anti Vibration
Blade length
Carburetor
Ignition System
Fuel Tank Capacity
Gas to Oil Ratio
Spark Plug
Spark Plug Gap
CARB Approved
EHT2300D
EHT2600D
14.5 lbs (6.6 kg)
15. 1
lbs (6.8 kg)
22.5 cc
25.4 cc
Shaft grips
Dual Isolation - grip and
engine mount
24
in.
Walbro Diaphragm Type
Solid State
0.53
qts.
(0.5
I
iter)
0.85
qts. (0.8
I
iter)
50:1
NGKBPM6Y
0.024 - 0.028 in.(0.6 - 0.7
mm)
Maruyama U.S., Inc.
301 - 30th Street NE, Suite 118
Auburn, WA 98002
253-735-7368 voice
253-735-1416 fax
www.maruyama-us.com
-23-
yes
P/N 222224 97.09
I
