— 7 —
5.
Make sure the cutting head shield is installed and
positioned correctly before using the Trimmer.
6.
Never use a cutting head or replacement parts that
are not approved by Maruyama.
7.
Maintain the Trimmer according to the recom-
mended maintenance intervals and procedures in
the Maintenance section on page 20.
8.
Shut off the engine and be certain the cutting head
has completely stopped rotating before inverting
the Trimmer, performing maintenance on or work-
ing on the machine.
9.
If running problems or excessive vibration occur,
stop immediately and inspect the unit for the
cause. If the cause cannot be determined or is
beyond your ability to correct, return the Trimmer
to your servicing dealer for repair.
Fuel Safety
1.
Gasoline is highly flammable and must be handled
and stored carefully. Use a container approved for
fuel for storing gasoline and/or fuel/oil mixture.
2.
Mix and pour fuel outdoors and where there are
no sparks or flames.
3.
Do not smoke near fuel or Trimmer, or while
using the Trimmer.
4.
Do not overfill the fuel tank. Stop filling 1/4-1/2
inch (6 mm-13 mm) from the top of the tank.
5.
Wipe up any spilled fuel before starting the
engine.
6.
Move the Trimmer at least 10 feet (3 m) away
from the fueling location before starting the
engine.
7.
Do not remove the fuel tank cap while the engine
is running, or right after stopping the engine.
8.
Allow the engine to cool before refueling.
9.
Drain the tank and run the engine dry before stor-
ing the unit.
10. Store fuel and Trimmer away from open flame,
sparks and excessive heat. Make sure fuel vapors
cannot reach sparks or open flames from water
heaters, furnaces, electric motors, etc.
Trimmer Operating Safety
1.
THIS TRIMMER CAN CAUSE SERIOUS
INJURIES. Read the instructions carefully. Be
familiar with all controls and the proper use of the
Trimmer.
2.
Make sure the 3.5mm pin has been removed from
the gearcase and boss adapter before you start the
engine.
10 feet (3 m) Minimum
