background image

— 1 —

Limited Warranty Statement

All Maruyama products are warranted to the original purchaser to be free from defects in material and work-
manship from the date of purchase for the time periods listed as follows:

Lifetime for inner drive shafts on trimmers and brushcutters and all ignition modules.  2 years for resi-
dential, non-institutional, non-income producing use.  1 year for industrial, commercial, institutional and
income producing use. 6 months for rental use.  Engine, refer to engine manufacturer‘s warranty
statement.  Maruyama engines are covered by this limited warranty statement.

Any part of a Maruyama product found to be defective within the applicable warranty period shall, at
Maruyama’s option, be repaired or replaced without charge.  Warranty consideration is obtained by deliver-
ing any Maruyama product believed to be defective to an Authorized Maruyama Servicing Dealer within the
applicable warranty period.
The purchaser shall not be charged for diagnostic labor that leads to the determination that a warranted part
is defective, if the diagnostic work is performed at a Maruyama Dealer.
Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled
only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for the warranty
period.  Any warranted part which is scheduled for replacement as required maintenance shall be warranted
for the period of time up to the first scheduled replacement point for that part.  Maruyama Mfg. Co., Inc. is
liable for damages to other engine components caused by the failure of warranted part still under warranty.
The purchaser is responsible for the performance of the required maintenance, as defined by Maruyama
Mfg. Co., Inc. in the Owner’s/Operator’s Manual.
EMISSION-RELATED PARTS WARRANTY:  In addition to the above warranty coverage, Maruyama Mfg.
Co., Inc. will repair or replace, free of charge, for the original purchaser and each subsequent purchaser any
emission-related part or parts found to be defective in material and workmanship for two (2) years from origi-
nal retail delivery date.  Emission-related parts are the carburetor assembly, the ignition coil assembly,
the ignition rotor and the spark plug. 
Any replacement part that is equivalent in performance and durabili-
ty may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of
Maruyama Mfg. Co., Inc.
This warranty does not cover the following:

1. Maintenance items (excluding defects in materials and workmanship) including hoses, spark plugs,

starter rope, air and fuel filters, clutch shoes, vibration isolators, throttle cables and all cutting attach-
ments, etc.

2. Extra expenses including shipping and handling, travel, payment for lost time or pay and for any

inconvenience and storage.

3. Alterations or modifications including aftermarket parts not authorized by Maruyama U.S., Inc.
4. Wear, accident, abuse, neglect, misuse, negligence, improper fuels, lubricants, fuel mixtures (when

applicable), or failure to operate or maintain the product in accordance with instructions approved by
Maruyama.

Repair or replacement as provided under this warranty is the exclusive remedy of the consumer.  Maruyama
shall not be liable for any incidental or consequential damages for breach of any express or implied warranty
on these products except to the extent prohibited by applicable law.  Any implied warranty of merchantability
or fitness for a particular purpose on these products is limited in duration to the warranty period as defined in
the limited warranty statement.  Maruyama reserves the right to change or improve the design of the product
without notice and does not assume obligation to update previously manufactured products. 
This warranty provides you with specific legal rights which may vary from state to state.
It is the Owner’s and Dealer’s responsibility to make sure the Warranty Registration Card is properly filled out
and mailed to Maruyama U.S., Inc.  Proof of purchase and registration will be required in order to obtain war-
ranty service.
To locate an Authorized Maruyama Servicing Dealer nearest you, contact Maruyama U.S., Inc. at 1-253-735-7368.

Effective March 1, 1997

Maruyama U.S., Inc.

P.O. Box 309

Auburn, WA 98071-0309

(253) 735-7368

[email protected]

www.maruyama-us.com

Summary of Contents for BST23





























Reviews: