— 1 —
SAFETY INSTRUCTIONS
0
1. Read and understand this Instruction Manual before using the brushcutter. Be thoroughly familiar with the prop-
er use of the brushcutter.
0
2. Never allow children to operate the brushcutter. it is not a toy. Never allow adults to operate the unit without first
reading the Instruction Manual.
0
3. Become familiar with the controls and know how to stop the engine quickly.
0
4. ALWAYS WEAR SAFETY GLASSES or other suitable eye protection, and hearing protection.
0
5. Keep the area of operation clear of all persons, particularly small children and pets.
0
6. Never operate a brushcutter when you are fatigued.
0
7. Never operate without proper guards or other protective safety devices in place.
0
8. Dress properly; do not wear loose clothing or jewelry. They can be caught in moving parts. Always wear sub-
stantial footwear, long pants and long sleeved shirt.
0
9. Gasoline is highly flammable; handle it carefully. Fill the fuel tank with the correct mixture of gasoline and oil
before trying to start the engine.
10. Use an approved fuel container to store the gasoline/oil mixture.
11. Do not fill the tank when the engine is hot or running.
12. Do not smoke while handling gasoline.
13. Fill the fuel tank outdoors and up to about 10mm from the top of the tank, not the top of the filler neck.
14. Wipe any spilled gasoline before starting the engine.
15. Always be sure of your footing; keep a firm hold of the handles with both hands, and walk, never run.
16. Use the right tool for the job. Do not use the brushcutter for any job that is not recommended by the manufactur-
er.
17. Keep all fasteners tight to be sure the brushcutter is in safe working condition. Follow the maintenance instruc-
tions provided on page 6 of this manual.
18. Do not put hands or feet near or under the rotating parts.
19. Keep clear at all times.
20. If the brushcutter should start to vibrate abnormally, stop the engine and check immediately for the cause.
Vibration is generally a warning of trouble.
21. Do not trim too close to the ground in order to avoid hitting small stones or other debris. Avoid using the brush-
cutter near rocks, gravel, stones and similar matter.
22. Use the brushcutter only in daylight or good artificial light.
23. Shut off the engine and be certain the cutting blade has completely stopped rotating before inverting the
machine.
SPECIFICATIONS
MODEL
BC3021H BC4321H BC4321H-RS BC5021H BC5021H-RS BCF4321H BCF4321H-RS BCF5021H BCF5021H-RS
Dry Weight (kg)
5.6
8.1
8.2
8.1
8.2
8.4
8.5
8.4
8.5
Handle Configuration
Horn Handle
Engine Displacement (cc)
30.1
41.5
41.5
49.9
49.9
41.5
41.5
49.9
49.9
Fuel Tank Capacityr ( )
0.6
1.0
Carburetor
Diaphragm Type
Ignition
Solid State System
Spark Plug
NGK BPM6Y Set Gap 0,6 - 0,7 mm
Fuel Mixture
Use Only Non - Leaded Regular Gasoline.
2 - Cycle Oil Mix 25:1 Ratio Must Be Approved For Air - Cooled Engines.
