MARUTI SUZUKI EECO Manual Download Page 93

Page: 93 / 123

8-26

INSPECTION AND MAINTENANCE

76MH1-74E

sure the blade is properly retained by

all the hooks. Grasp the blade near the

locked end and pull in the direction of

the arrows to lock the end into place.

6) Reinstall wiper frame to arm, making

sure that the lock lever is snapped

securely into the arm.

AIR CONDITIONING SYSTEM
(if equipped)

If you do not use the air conditioner for a

long period, such as during winter, it may

not give the best performance when you

start using it again. To help maintain opti-

mum performance and durability of your air

conditioner, it needs to be run periodically.

Operate the air conditioner at least once a

month for one minute with the engine

idling. This circulates the refrigerant and oil

and helps protect the internal components.

Summary of Contents for EECO




























































































































Search results

Summary of Contents for EECO

Reviews:

Related manuals for EECO

Brands by name

Popular brands

MARUTI SUZUKI EECO, Manual

Search results

Summary of Contents for EECO

Reviews:

Related manuals for EECO

Brands by name

Popular brands