53
MUST be set after UPS installation or the QTY of
Power Module is changed
Power
Rating
Setting
Set Power Module Rating
20KVA
30KVA (Default)
The 30K cabinet can be inserted with all 20KVA power
modules. For this kind of application, the Power Rating
has to be set to 20KVA.
If setting is not corresponding to power capacity of
power module, it will show error message.
MUST be reviewed after UPS installation
Charger Test --
Set charger test
Disable (Default)
Enable
4.2.6.3 Setup-Battery Screen
Use UP and DOWN buttons to switch different sub-menus. Press ENTER button to go into the
BATTERY setting screen, as shown in Figure 4-23, 4-24.
Figure 4-23 Setup-Battery Screen page 1
Figure 4-24 Setup-Battery Screen page 2
