Martinsound Martech Modular Studio Series, Owner'S Manual, Page: 17 / 28

11
In this example the MSS-10 is placed in
the control room next to the engineer.
The Mic Preamp Out is connected to an
external process chain, such as an equal-
izer and compressor. The process chain
output is connected to the balanced Line
In of the MSS-10. The Line In is selected
to the line driver and the Line Out is
connected to the recorder, with the Cal
switch disengaged. This setup gives the
engineer the ability to set the best gain,
process, ride the level, mute and unmute
the audio, and meter the output level
during the recording process. Again, this
works well for all tracking and overdub
situations where a single microphone is
recorded to a track.
This method maintains the shortest, fully
controlled audio path from the micro-
phone to the recorder while utilizing your
preferred outboard equipment.
Many other configurations are possible
so as to match the needs of the engineer
without compromising the audio quality.
We at MARTECH have sought to provide
a versatile tool that will reshape the way
you work as an engineer.
Tossing In The Kitchen Sink